:These are the most important navigation commands, available in the MetaTexis toolbar or the Navigation sub-menu of the MetaTexis menu:
·
Open next translation unit (Alt+Down) :
With this command, you can open the next available translation unit, starting from the current cursor position. (If there is a TU open anywhere in the document, it is closed automatically before the next translation unit is opened.)
·
Open previous translation unit (Alt+Up) 
:
The same as above, the only difference being that you go upwards instead of downwards.
·
Go to next translation unit to be
translated/revised
(Alt+Shift+Down)
:
Through this command, you can go to the next translation unit which needs manual input, because no 100% match was found in the TM, or which does not meet the formal requirements you have specified (see Quality Control).
·
Go to previous translation unit to be
translated/revised
(Alt+Shift+Up)
:
The same as above, the only difference being that you go upwards instead of downwards.
·
Go to last translation unit opened (Alt+Home) 
:
Through this command, you can go to the last translation unit which was opened.
·
Close translation unit (Alt+End) 
:
Through this command, any open translation unit is closed.
For more information, see the Navigation.